Estimation of the load diagram for a secondary substation with the following consumers data

The data is normalized to sum 1, indicating that the total load is 1 unit. The average consumption per capita in one week is 0.75126 kWh. The number of consumers per type is not explicitly stated, but the estimated energy per consumer type is provided. The load profiles are presented for each hour of the day, from 0:00 to 23:00, for each day of the week. The data is organized into four categories: Residential, Commercial, Industry, and Pub. Lighting. The load profiles for each category are presented as a series of values, with each value representing the load at a specific hour of the day. The load profiles for Residential consumers show a peak load of 0.75126 at 0:00 and a minimum load of 0.004873275 at 23:00. The load profiles for Commercial consumers show a peak load of 0.75126 at 0:00 and a minimum load of 0.003701101 at 23:00. The load profiles for Industry consumers show a peak load of 0.75126 at 0:00 and a minimum load of 0.004147715 at 23:00. The load profiles for Pub. Lighting consumers show a peak load of 0.75126 at 0:00 and a minimum load of 0.00974026 at 23:00. The load profiles for each day of the week are similar, with slight variations in the peak and minimum loads. The peak loads occur at 0:00, while the minimum loads occur at 23:00. The load profiles for each category are consistent across all days of the week. The estimated energy per consumer type is provided for each category. The Residential category has an estimated energy of 0.75126 kWh, while the Commercial category has an estimated energy of 0.27072 kWh. The Industry category has an estimated energy of 0.37650 kWh, while the Pub. Lighting category has an estimated energy of 0.05824 kWh. The data presented in the load profiles can be used to estimate the total energy consumption of the secondary substation. By multiplying the load profiles by the estimated energy per consumer type, the total energy consumption can be calculated. The total energy consumption can be used to determine the capacity of the substation and to plan for future energy needs.